First, before installation
1.We’d better coated with a suitable rust inhibitor on the centrifugal pump surface which has not been installed and used to prevent the pump is oxidized ;
2. Bearing maintenance of its oil lubrication, we’d better be filled with a suitable fluid. However, these oil selection also has a lot of skill. For example: During use, preferably filled with a grease, rather than going to use those mixed grease. Because the life of the mechanical mixing grease has a great harm.
Second, hold down
During the centrifugal pump use, such as for special reasons (annual leave) to suspend production, resulting in long-term hold pump, then we should note in the storage process:
1. The media in the pump should be rinse with water to ensure that no residue cavity, prevent deterioration and other causes liquid mixed fluid medium;
2. The centrifugal pump must be stored in those clean environments, and extremely dry place, otherwise, it is prone to rust liquid, liquid injection and corrosion inside the pump casing structure.
Special note: If not stored properly, may cause permanent and irreparable harm, so that will has a great impact on our future use.
In actual use, there may be more questions, if you want to learn more about the centrifugal knowledge, welcome to call for free advice, with your support we can do better.