(1) Small pump seal failure below 715kW often produce grinding shaft, grinding shaft position mainly in the following: dynamic ring auxiliary seal, static ring position, a few springs have grinding axis phenomenon.
(2) The main reasons of grinding: ① BIA-type double-ended mechanical seal, back pressure state is a bad working condition, the media particles, impurities are easy to enter the sealing surface, so that the seal failure. ② The main part of the grinding shaft is rubber bellows, and because the upper sealing surface is in bad lubrication state, the friction torque between the static and dynamic ring is larger than the transmission torque between the rubber bellows and the shaft, and the relative rotation occurs. ③ Dynamic and static ring auxiliary seal due to the sewage in the weak acid, weak alkali corrosion, rubber pieces have been inelastic. Some have rotten, lost the proper function, resulting in the phenomenon of grinding shaft.
(3) To solve the above problems, now take the following measures: ① to ensure that the lower end of the cover, the cleanliness of the oil chamber, not clean the oil prohibited assembly. ② machine oil chamber oil tank line should be higher than the static and dynamic ring sealing surface. ③ according to the use of different media use different structure of the machine seal. For high-lift pump should be re-designed mechanical seal structure, the corrosive media rubber should be selected weak acid, weak alkali of fluorine rubber. Seal ring should be added to the ring.